04/19/2024
ROCK DRILLS / BLASTHOLE DRILLS / TRACK MOUNTED AND BUGGY MOUNTED DRILLS
REICHDRILL 650 CRAWLER MOUNTED DRILL RIG (Ref#5163T)
Manufactured 1990, 900/350 Sullair compressor (4100 hours), Cat 3406 engine (6630 hours), (3) 4-1/2” x 25’ drill rods, well maintained, dimensions: 13’6” H x 13’2” W, 85,000 lbs, ready to work Price: $99,500
REICHDRILL 650-DII BLAST HOLE DRILL RIG (Ref#3507T)
Sullair 900/350 air compressor (600 hours since rebuilt), Cat 3406C deck engine (600 hours since rebuild), mounted on 2006 Mack tri-axle truck with Mack diesel engine, 3 hydraulic leveling jacks, dust collector Price: $390,000
RTDrill RTD28 CRAWLER DRILL RIG (Ref#1595Tb)
Manufactured 2019, approx. 2850 hours, 750/350 air, Cat C13 Tier IV engine, rod changer, dust collector Price on Request
SANDVIK D25KW CRAWLER DRILL RIG (Ref#9963Ta)
Manufactured 2007, drills 5” to 6-3/4” diameter up to 88’ Price: $195,000
SANDVIK D25 DRILL RIGS (Ref#297T) 4 AVAILABLE, Manufactured 2012 – 2014, located Africa Price: $935,000 USD
GARDNER DENVER 40T BLAST HOLE RIG (Ref#2904T)
Built 1978, 90,000# pullback, 600/120 air compressor, Detroit powered, mast will accommodate 26” x 40” casing, 3” plumbing and swivel for mud or air, originally built for uranium mining Price: $220,000
CAT BLASTHOLE DRILL (Ref#5672T)
Track mounted, Mach IV Sherman tank undercarriage, 6V71 Detroit diesel engine, 600/120 air compressor, operator’s cab, rod box, pipe, bits, tools etc., sitting since 2019 but running when parked Price: $22,500 USD
ATLAS COPCO 842 (Ref#8071Rb) Includes 1238 hammer, John Deere diesel water cooled deck engine, Quincy 185 cfm air compressor, fuel pump needs repair Price: $25,000 USD
INGERSOLL RAND DML (Ref#5791T)
Recently rebuilt engine, radiator, coolers, mast cylinders, head motors, hyd pumps, new pins, bushings, pulldown cables, 1050/350 air compressor, undercarriage is good, needs rollers, no cracks in frame, (6) 5” x 30’ drill rods (180’) Price: $165,000
SANDVIK D75KS ROTARY DRILL RIG (Ref#299T)
Year 2011, Cat 3412 diesel engine, Sullair LLC compressor, mounted on track, fleet maintained and in good condition, inspection report available on request Price $350,000
SANDVIK TAMROCK DX800 DRILL RIG (Ref#496Ta)
Built 2018, 9000 hours, located Middle East Price: $205,000 USD
SANDVIK TAMROCK DX800 DRILL RIG (Ref#496Tb)
Built 2016, 11,000 hours, located Middle East Price: $187,000 USD
TAMROCK 660 (Ref#14479Ta)
Manufactured 1994, 285 psi on board air compressor, Cat engine, HL 600 hammer, rod changer, track mounted, has 20’ mast, set up for T45 rod but can run T51 rod Price: $38,500
Rod available at extra cost
SANDVIK TAMROCK 1500 (Ref#13874T)
Year 2006 Price: $100,000
INGERSOLL RAND ECM-490 (Ref#88N)
Manufactured 1997, 185 compressor, self-contained, 18’ mast, no carousel, (8) 10’ sticks of T45 pipe, YH70 hammer, dust collector, good condition Price: $65,000
INGERSOLL RAND ECM 370 (Ref#14156c)
Manufactured 1994, sitting idle for a few years and will require some refurbishing to the air coupler, two pistons repacked, O-ring replaced, 5 rods and bit, 140 hammer Price: $37,000
GILL BEETLE TRACK MOUNTED DRILL RIG (Ref#9760T)
Manufactured 1985, crawler mounted, hydraulic driven undercarriage, Detroit 353 diesel engine, 6 rod carousel.
825/300 VHP IR compressor with diesel engine mounted on Fast Track 2-axle trailer, good condition,
500’ of 10’ pipe
6” hammer
Package Price: $49,500
GILL BEETLE MODEL 300C ROCK DRILL (Ref#2010Ta)
Manufactured 2012, 4420 hours, chain winch, rops, ac/heat, 4.5L John Deere 4045HF-485A engine, 160 hp, shoe width 14”, track mounted, EPA label, ready to work Price: $285,000 USD
GILL BEETLE 200C ROCK DRILL (Ref#2010Tb)
Manufactured 2009, 16,116 hours, Cummins 4BTA 116-2500, 116 hp, cable winch, 14” pads, track mounted, EPA label, ready to work Price: $100,000
SCORPION TRACK DRILL (Ref#4763Tb)
3126 diesel engine (rebuilt), 900 cfm air compressor, 361 hammer, 8” wide, good tracks, complete, last drilled 2019, approx 25,000 miles, set up for T45, max diameter 3-1/2” (3 parts rigs available at extra cost) Price: $21,000
REEDRILL SKF CRAWLER MOUNTED BLAST HOLE DRILL (Ref#1952Tc)
Manufactured 2005, 1350/350 air compressor, dust suppression, A/C cab, 18” triple grousers, good condition, located Canada Price on Request
INGERSOLL RAND DM25SP (Ref#9817R)
Track drill with Cummins KT1150 engine, recently rebuilt, 750/300 air compressor, hot box, dust box, new 2 7/8” x 48’ kelly PRICE: $50,000
ATLAS COPCO DM30 (Ref#10708T) Manufactured 2014, brand new, never used with zero drilling hours, Cat C15 Acert 540 hp (Tier III) diesel engine, 1050/110 air compressor, 152mm – 200mm diameter, 9.1m/30’ drill pipe, 45m max drill depth, 34 ton overall weight Price: $465,000
ATLAS COPCO DM30 (Ref#6909RB)
Manufactured 2006, track mounted with Cummins QSX15 Tier III 525hp@1,8000RPM engine, IR 900/350 air compressor, 4 rod carousel for 4.5" x 30' (3.5"API Reg) drill pipe, 4.5"OD x 3.5"API Reg spindle sub, water injection (0-3GPM) with 200 gallon tank, dust collector, torque limit control, 7 gallon DHD Lube, Engine preheater, auto thread Lube-pneumatic PRICE: $220,000
INGERSOLL RAND DM30 DRILL (Ref#6910T)
Built 1990, Cummins mechanical diesel engine Price: $85,000
SULLIVAN AIR TRACK ROCK DRILL (Ref#8028Tb)
Boom extension, air/hydraulic elevation, air motor feed drive, Joy air drill head, ILMEG AS-900 dust collector system, located Canada Price on Request
TAMROCK DHA HYDRAULIC CRAWLER ROCK DRILL (Ref#8028Tc)
CATERPILLAR turbo diesel engine, drill head, dust collector system, full cab enclosure with heat, 1269 hours recorded on meter at the time of listing - meter considered inaccurate, located Canada Price on Request
GARDNER DENVER ATD-3100 AIR TRACK ROCK DRILL (Ref#8028Td)
14' boom, drill head, air/hydraulic elevation, air motor feed drive, located Canada Price on Request
GARDNER DENVER AIR TRACK ROCK DRILL WITH BOOM (Ref#8028Te)
Air/hydraulic elevation, air motor feed drive, air drill head, located Canada Price on Request
TEI ROCK DRILL (Ref#7689T) all hydraulic, 12’ stroke with sub, head new 2008, mounted on skid steer, down hole hammer, 135’ of 2-3/4” drill string Price: $40,000
ARDCO C1000 DRILL AND WATER BUGGY PACKAGE (Ref#6180T)
Ardco K 4 x 4 with C1000 drill powered by rebuilt Detroit 453 diesel engine, ties: 23.1 x 26 rice and cane grip, Ramey 700 winch with 5/8 cable, 4-1/2 x 5 Failing duplex mud pump, 542 new process transmission, chain case, Rockwell rear ends. Well maintained and field ready.
Ardco K 4 x 4 with 800 gallon water tank, new 300 6-cylinder Ford gas engine, tires: 23.1 x 26 rice and cane grip, Ramey 700 winch with 5/8 cable, 542 new process transmission, chain case, rockwell rear ends, well maintained and field ready
Package Price: $87,500
ARDCAN K20 AUGER RIG (Ref#6091T)
Manufactured 1985, mounted on Ardco 6 x 6 carrier with Cat 3208 diesel engine, Norhill style tophead auger rig, driller's platform, toolboxes, no drill pipe, extra set of tires, Rockwell axles, hydraulic steering and brakes Price: $97,500
IVI PROPSECTOR DRILL BUGGY – AIR ROTARY/MUD ROTARY/AUGER/REVERSE CIRCULATION AND ANGLE (Ref#6092Ta)
Built 1983, heavy duty chains on mast/topdrive, engines updated in 2010 to John Deere 6081 diesels, 580/75 or 380/250 2-stage air compressor, Clark 4 speed automatic transmission, 100 gallon on board water tank, Bean injection pump, front winch, dims/weight: 27’L x 8’4”W x 9’6” H 30,000 lbs., no tooling included (green rig) Price: $165,000
IVI PROPSECTOR DRILL BUGGY – AIR ROTARY/MUD ROTARY/AUGER/REVERSE CIRCULATION AND ANGLE (Ref#6092Tb)
Built 1983, engines updated in 2010 to John Deere 6081 diesels, 580/75 or 380/250 2-stage air compressor, Clark 4 speed automatic transmission, 100 gallon on board water tank, Bean injection pump, front winch, dims/weight: 27’L x 8’4”W x 9’6” H 30,000 lbs., no tooling included Price: $140,000
HILLYARD DRILL BUGGY (Ref#9903Tb)
Gardner Denver 5 x 6 mud pump, complete fluid end rebuilt, power end in excellent shape, 426 liquid cooled Gardner Denver air compressor, new oil in compressor, 671 Detroit engine Price: $40,000
GEMCO BUGGY (Ref#9903Ta)
Detroit 6V92 engine, transfer case to run rig or other equipment Price: $25,000
HIGHLAND DRILL/GEMCO APACHE 4 X 4 BUGGY (Ref#12482T) Ingersoll Rand 151 screw air compressor (rebuilt), 151 Cummins 8.3, Case J1-6T-830, Ardco drill buggy/tractor, bits Price: $40,000
ARDCO K1000 DRILL RIG BUGGY AND WATER BUGGY (Ref#9885T)
Detroit 453 engine, Gardner Denver 5 x 6 mud pump, no air, and ARDCO WATER BUGGY with Detroit 453 engine, 750 gallon tank, both ready to work Price: $110,000
ARDCO BUGGY RIG (Ref#2693T)
No mud pump (removed), mounted on 4 x 4 Ardco buggy with Detroit 453 diesel engine, 2 rear hydraulic leveling jacks, new pipe and bit Price: $57,500
ARDCO BUGGY RIG (Ref#5613R) Transquip topdrive, Cat engine, Leroi 256S2 air compressor, GD 4 ½ x 6 mud pump, 300’ of 10’ x 2 3/8” Mayhew Jr pipe, currently drilling, excellent condition Price: $320,000 PRICE REDUCED: $115,000
ARDCO BUGGY DRILL RIG AND WATER BUGGY (Ref#5218Ta) Rig manufactured 1973, Cummins engine. Ardco 750 gal water buggy with Detroit engine Price: $112,500
ARDCO AIR BUGGY DRILL (Ref#13566T)
LeRoi 50S air compressor, 453 Detroit diesel engine, top head drive will be installed and operations Price: $43,500
HILYARD WATER/DRILL BUGGY (Ref#2392T)
4-1/2 x 5 Gardner Denver mud pump, 453 Detroit diesel engine Price: $43,500
ARDCO DRILLS (Ref#9947T)
2 available, 4-1/2 x 5 Gardner Denver mud pumps, 453 Detroit diesel engines Price: $43,500 each